"1930s semi, boiler swap plus a full magnetic filter and power flush. Straightforward, tidy, no surprises. Radiators are hotter than they've been in years."
— Joanne P., Standish · Boiler swap + power flush, Standish
Greater Manchester
In short
Wigan terrace mains often route under a suspended timber floor with 15mm copper on lead-solder joints — the honest trace is thermal imaging plus a 30-minute isolation test before any board is lifted.
Incoming mains typically 3.4–4.4 bar across WN1–WN8. Standish/Aspull elevation drops pressure to 2.8–3.6 bar.
Every report we send in Wigan prints the incoming static and dynamic pressure at the stopcock alongside the cause statement — pressure is often half the leak story and adjusters want to see it.
Wigan leak-trace work leans toward lead-solder joint failures under central Wigan/Pemberton terrace floors, push-fit joint failures on Standish semi mains, and concealed heating leaks in Aspull/Shevington newer estates.
Common Wigan insurers: Admiral, Direct Line, Aviva and Halifax. Halifax adjusters want the plain-English cause statement.
Wigan insurers (particularly Halifax) want a plain-English cause statement that a non-technical claim handler can follow. "Failed lead-solder joint on 15mm copper cold-water supply under suspended timber floor, first-floor bathroom" beats "cold supply leak at joint".
Every insurance-friendly report includes: date and address, incoming static and dynamic pressure readings (bar), thermal-imaging screenshots with location markers, acoustic-tracer transcript, dye-test results where applicable, non-invasive access method used, engineer name and qualification, and a plain-English cause statement. Delivered as a single PDF within 48 hours.
£185–£320 for a non-invasive trace and written report; £420–£680 with terrace-floor investigation.
Every price is confirmed in writing after the £50 diagnostic. Nothing beyond the trace itself starts without your approval, and the £50 is refunded if the leak can't be located non-invasively.
A Wigan pattern is quoting a full re-pipe on a single joint failure on 100-year-old lead-solder pipework. The fix is a joint remake and localised copper section — insist on evidence-based scope.
Our promise on every Wigan leak-detection call-out: £50 to attend, log pressure and run the first non-invasive trace; an insurance-friendly PDF report within 48 hours; and refund of the £50 if the leak can't be located non-invasively.
"1930s semi, boiler swap plus a full magnetic filter and power flush. Straightforward, tidy, no surprises. Radiators are hotter than they've been in years."
— Joanne P., Standish · Boiler swap + power flush, Standish
"Slow leak coming through the kitchen ceiling — traced to a microbore joint under the bedroom laminate. Lifted a single board, fixed it, put it back so you'd never know."
— Craig B., Leigh · Microbore leak repair, Leigh
"Bathroom refit including moving the soil stack. Fair fixed price, stuck to the quote, and the finish is excellent."
— Sian H., Orrell · Bathroom refit, Orrell
Fixed £50 diagnostic
Flat fee. No hourly meter running.
Fair quote or refund
Transparent pricing — refunded if we don't fix it.
Vetted UK engineers
DBS-checked, insured, real reviews.
AI-triaged in seconds
KJ chats first so the right engineer arrives.
Suspected leak in Wigan?
Call 01706 318200 or start a chat — we'll book a £50 non-invasive trace and deliver an insurance-friendly PDF report within 48 hours.
KJ
Founder, KJ Plumbers · Online now
KJ
onlineHonest UK plumbing advice — free where safe, £50 home visit only if needed.
Hi, I'm KJ. Tell me what's happening — leak, blockage, boiler, emergency, anything — and I'll help you sort it.
You can send a photo, short video, voice note or share your location — whatever's easiest.
Please avoid sending faces, documents, house numbers or payment cards in photos. This chat is a digital version of KJ — for genuine emergencies call 01706 318200 or the National Gas Emergency Service on 0800 111 999.
Common plumbing problems — tap one to start